IMT 70735257, Руководство пользователя

Страница: 20 / 29

70735258 SII Base Receiver 16 Section - 5
70735258 - Base Unit Hardware Specs / Base Unit Safety Link / Base Unit
Hardware
BASE UNIT HARDWARE SPECIFICATIONS
REQUIRED FIELDS DESCRIPTION DETAILS
CONTROL POWER 7-28VDC USING 12VDC
RF FREQUENCY 2400MHz 2405-2480MHz @ 100 mW
ANTENNA OPTION INTERNAL
DISCRETE CHANNELS 16 15 HIGH SIDE OUTPUTS: ONE HIGH SIDE INPUTS
PROPORTIONAL CHANNEL 1 PMW OUTPUTS
ANALOG CHANNEL 1 4-20mA
MESSAGE PERIODICITY 10x/s ONE MESSAGE EVERY 100ms
ON AIR TIME 2S 8 OR 16 BYTE PAYLOAD
LINK LOSS CRITERIA 0.5S 5 CONSECUTIVE MESSAGES
VALVE INFORMATION PMW FREQ: 150Hz; DUTY CYCLE: 20-80%; LOAD: 4.7Ώ
CAN INFORMATION J1939
REFER TO STANDARD EXTENDED CONFIGURATION FOR
CAN MESSAGING BETWEEN PG AND BU
BASE UNIT SAFETY LINK
WHEN ANY OF THE FOLLOWING OCCURS:
• MACHINE STOP IS PRESSED
• HANDHELD UNIT GOES OUT OF RANGE
• HANDHELD UNIT DE-ACTIVATES DUE TO LOSS OF POWER, INACTIVITY TIME-OUT, OR DELIBERATE
DEACTIVATION (OFF SWITCH)
X
ENABLED DISABLED
ALL LATCHED OUTPUTS UNLATCH, AND ALL
MOMENTARY OUTPUTS THAT ARE ACTIVE,
DE-ACTIVATE UPON ACTIVATION OF HANDHELD. NO
OUTPUTS ARE ALLOWED TO BE ACTIVATED UNTIL ALL
SWITCHES (UNLESS MASKED) ARE FIRST CENTERED
OR RETURNED TO THEIR NEUTRAL STATE.
.
ALL LATCHED OUTPUTS REMAIN LATCHED, BUT
ALL MOMENTARY COMMANDS THAT ARE ACTIVE
DE-ACTIVATE.
NOTE:
IF HANDHELD UNIT IS POWERED ON AND A
MOMENTARY COMMAND THAT WAS DE-ACTIVATED
DUE TO RANGE IS STILL ACTIVE WHEN THE HANDHELD
RETURNS IN RANGE, THE OUTPUT WILL IMMEDIATELY
BE ACTIVE AGAIN
06/15/2022 SII Telescopic Proportional Electric Crane Radio Remote