IMT Analytics CITREX H3, Руководство пользователя

Страница: 34 / 46

Specifications
34
14
IMT Analytics AG
Additional readings Measuring range Accuracy
Oxygen concentration
(pressure compensated ≤
150 mbar)
0 – 100 % ± 1% O
2
**
Gas temperature****
0 – 50 °C
± 1.75% *
or ± 0.5 °C **
Gas type Air, Air/O
2
, N
2
O/O
2
Gas Standard ATP, ATPD, ATPS, AP21, STP,
STPH, BTPS, BTPS-A, BTPD
Units of measurement
Flow L/min, L/s, cfm
Pressure bar, mbar, cmH
2
O, mmHg,
inH
2
O
Table 9: Additional readings
It is the larger tolerance that applies: * Tolerance in relation to the reading ** Absolute tolerance
*** In this User Manual the unit sL/min is based on ambient conditions of 0°C and 1013.25 mbar (DIN1343)
**** CITREX H3 measures the gas temperature inside the measurement channel. While CITREX H3 is warm-
ing up, the temperature of the measurement channel, and hence also the temperature of the gas inside
the measurement channel, rises at the same time. The measurement channel volume is relatively small,
even for relatively high volumetric flows (e.g. PIF @ 60 L/min). If the temperature of the gas on entering
CITREX H3 is compared with gas temperature in the measurement channel, it becomes evident that the
temperature in the measurement channel is higher. Therefore the temperature of the gas entering the
CITREX H3 measurement channel should not be expected to equal the temperature displayed on the
screen because the temperature displayed is measured inside the CITREX H3 measurement channel.
Ventilation parameters Measuring
range Accuracy
Rate Breaths/min 1 – 1000 breaths/
min ± 1 breath or ± 2.5% **
Time T
i
0.05 – 60 s ± 0.02 s
Ratio I:E 1:300 – 300:1 ± 2.5% *
Tidal volume V
ti
± 10 sL ± 2%* or ± 0.20 mL (> 6 sL/min)**
Minute volume V
i
0 – 300 sL/min ± 2.5% *
Peak flow Insp. / exp. ± 300 sL/min ± 2% * or ± 0.1 sL/min **
Pressure P
Peak
, P
Mean
,
PEEP
0 – 150 mbar ± 0.75% * or ± 0.1 mbar **
Trigger Adult,
Pediatric,
Flow, Pres-
sure
Table 10: Ventilation parameters