FeneGuard® - Installation Guide
10
IM-001-1218
© 2019 IMSA Group GmbH
INSTALLATION ON AWNING OR HOPPER WINDOWS
Open the window as wide as possible.
Position the FeneGuard® safety cable so that it
it does not interfere with the window opening
and closing movements.
If necessary, the part of the cable with the
spring can be installed on the sash (inversion
of the cable). The safety cable works also in
this mode.
Fix the aluminium plates and tighten the
screws as shown in the instructions
"
Installation on normal tilt&turn windows
"
from point 1 to point 5.
The right type of screws for the window frame
must be used.
Consult the window profile manufacturer or
supplier for information about the right screws to
use for the window.
After installing the FeneGuard® safety cable,
check that the window opens and closes
correctly!
Check that the cable does not interfere with the
side opening arms!
