IMRELAX IM-MH230 BEAM 7R, Руководство пользователя

Страница: 4 / 11

Ø setting up
options explain
operational
mode DMX slave
： Receiving DMX signal from controller or from Master fixture
Random
auto
sound
control
DMX address 1~512
Press "ok" button to enter edit state.At this point is selected one
hundred, press the "up" "down" key to change the address
code.Press the "ok" button once again and selected 10 editor.Press
the "ok" button once again and select bits editor.According to the
state of an exit the editor again
Channel mode Standard
16CH
Standard 16 channel model, 17 ~ 20 channel is invalid
Extend 20CH Extended 20 channel mode, 17 ~ 20 channel control speed
Invert Pan close
open
Invert Tilt close
open
Pan-Tilt Swap close
open
The exchange of XY channels (including fine-tuning)
Pan-Tilt
Encoder open Using encoder (optocoupler) judging out-of-step and automatically
correct position
close
Do not use the encoder (optocoupler) correct position
No DMX single
hold
According to the original state continues to run
reset
The motor return, stop running
Display open
Close the backlight after 30 seconds
close backlight always open
Lamp ON@
Start up
close
After power on reset directly, not light bulb (menu or control table
has to be used to manually light bulbs)
open Automatically lamp lights on after power on , and wait for the light
bulb lights up the success had only then to reset
Screen
autorotation close Close screen automatic rotation function
open Open screen automatic rotation function
RESTORE
DEFAULTS
Click "ok" button after see confirmation dialog, press the "ok" key
again to restore the default Settings