®
Environmental Equipment, Inc.
IMR EX610 User Manual
3632 Central Ave. St. Petersburg, FL 33711 – Phone: 727-328-2818 / 800-RING-IMR – Fax: 727-328-2826 – E-mail: [email protected] – Web: www.imrusa.com
THE PRIDE OF THE COMPANY – MADE IN THE USA
Page
11
of
27
8.
Display STEL and TWA levels:
STEL
TWA
Note:
Only available for Toxic gas.
9.
Self-test pass
After the self-test; the device starts a short warm-up countdown (3-30 seconds). After the warm-up; the screen
below is display indicating the device has finished startup.
Note:
If the self-test fails, it will display error information. Refer to "Time fault alarm" and "Storage fault
alarm" in section 4.5. If self-test passed without error then the detector will automatically select a warm up time
from 3s~30s based on the sensor.
4.2
Power off
With the device powered on. When the device is not in detection mode, hold
and the screen displays the
following:
