Impulse RT700, Руководство пользователя

Страница: 41 / 44

─
41
─
Belt Adjustment and Maintenance
A B
1. Running Belt Adjustment
Caution
Over-tightening of the roller will severely shorten the life of the running belt
and may cause further damage to other components (such as Roller, Motor etc.).
Speed of Running Belt don't exceed 4KMH, during adjustment.
1.1 Adjust Running Belt in center of treadmill
Running belt is possible off normal while using for period of time or just use a new
treadmill, solution of two situations are as following:
A. Running belt is deviation to right
Tension (Clockwise direction) right bolt or loose (Anticlockwise direction) left
bolt of rear roller with a 6mm Allen wrench as below figure.
B. Running belt is deviation to left
Tension left bolt or loose right bolt of rear roller with a 6mm Allen wrench as
below figure.
1.2 Running Belt tension
When you plant your foot on the belt, if you can feel a slipping
sensation then the belt has been stretched and is slipping across the
rollers, which is a normal and common adjustment is needed on a new
treadmill or using for period of time. Tension both the Allen bolts of
rear roller 1/4 TURN as below figure to eliminate this slipping. Try the
treadmill again to check for slipping. Repeat if necessary, but NEVER
TURN the roller bolts more than 1/4 turn at one times.
Perfect tension of running belt is 0.9~1.1 lbs.
Left
Right
Left
Right