─
15
─
Assembly
Step 5
1.Attach three 4.5" Pulley (#21) to the Weight Stack Frame(#1)using:
three M10*50 HHB (#52) six
Φ
11*
Φ
23*2 Flat Washers (#66)
three M10 Nylon Lock Nut (#71)
2.Attach three 4.5" Pulley (#21) to the Main Frame (#2) using:
three M10*50 HHB (#52)
six Φ
11*
Φ23
*2 Flat Washers (#66)
three M10 Nylon Lock Nut (#71)
3.Attach one 4.5" Pulley (#21) to the Leverage Arm Support (#3) using:
one M10*50 HHB (#52)
two
Φ
11*
Φ23
*2 Flat Washers (#66)
one M10 Nylon Lock Nut (#71)
4.Attach the Cable(#19) to the Leverage Arm Support(#3)using:
one M10*45 HHB (#58) two
Φ
11*
Φ23
*2 Flat Washers (#66)
one M10 Nylon Lock Nut (#71) one Spacer
Φ
10*
Φ
14*20 (#50)
Note:
Hand tighten bolts and Nylon Lock nuts until machine is fully assembled.
