impro HRR900, Руководство по установке

Страница: 1 / 16

MODEL NUMBERS:
HRR900-0-1-GB-XX
HRR901-0-1-GB-XX
Quad Receiver
433.92 MHz 4-Channel RF Receiver
INSTALLATION MANUAL
SPECIFICATIONS
Working Environment
Water resistance .................... Designed to work in an indoor or outdoor
environment similar to IP44, the Impro Quad
Receiver is water resistant
Power Source
Input Voltage ................................
11V to 15 V DC (Polarity sensitive)
Power Requirements Current (mA) Power (W)
12 V DC ................................. 60 0.7
NOTE: When upgrading or replacing a legacy “ImproX UHF Receiver”, make sure
to reconnect using a 12V DC supply.
INSTALLATION INFORMATION
CAUTION: These two models of the Impro Quad Receiver only support
connection to the Impro IXP220 Controller, IXP20 Controller, iTRT
(Intelligent Twin Reader Terminal), MfT (Multi-function Terminal), TA
(Time Attendance Terminal), and the Impro UniScan and FlexiScan
Controllers. DO NOT attempt to connect this Receiver to an Impro
(DT) Door Terminal.