impinj RShell, Справочное руководство

Страница: 7 / 49

RShell Reference Manual
6
.
Proprietary and Confidential
Revision 4.2, Copyright © 2009, Impinj, Inc.
Table 3-1 General Status Codes
Error Code Error String Description
0 Success The command completed successfully
1 Invalid-Command Command could not be parsed and
identified as one of the commands
supported by the interface.
2 Invalid-Command-Parameter Parameter types was unrecognized for
this command (one or more).
3 Invalid-Parameter-Value One or more parameter values was
illegal or out-of-range for this command.
4 Parameter-Dependency-Error Parameter value was invalid in
combination with other parameters or
values.
5 Incomplete-Parameter-List The parameter list was incompletely
specified and the command cannot be
executed.
6 System-Resource-Limit Command could not be executed
because of a resource limit in the
system (e.g., could not add a fourth trap
receiver because the device only
supports three).
7 Unsupported-Command Reserved for Future commands.
8 Permission-Denied User does not have permission to
access this command.
9 Previous-Command-In-
Progress The command was rejected because a
previous command is still in progress
such that this one could not be
processed.
10 Command-Being-Processed The command cannot be finished right
away; it is being processed.
A sample error parameter string is shown below (the command is deliberately misspelled):
> configg
Status='1,Invalid-Command'
When a command’s action generates results, they follow the status line, one parameter per line in
the following format:
ParameterName='value'
ParameterName='value'
...
ParameterName='value'