COMPUTER
MODE SET RESET
AUTO START / STOP
When exercise starts, the monitor will automatically turn on and display the progress. When
exercise stops, the monitor will automatically turn off after 8 minutes to save energy.
FUNCTION KEY:
MODE –
Press to scan or select modes (Time, Speed, Distance, Calories, Total Distance,
and Pulse Rate).
SET –
Press to pre-set the desired value of Time, Distance, and Calories.
RESET –
Press to set all values of Time, Distance, and Calories back to Zero
DETAIL OF OPERATION:
1.
SCAN
: Automatically scan through each mode in sequence every 4 seconds.
2.
TIME
: Accumulates total exercise time up to 99:59.
3.
SPEED
: Display the current speed in miles per hour.
4.
DISTANCE
: Accumulates pedaled distance up to 99.99 miles from zero.
5.
CAL
: Accumulates calories consumption during exercise; max value is 9999 cal.
6.
TOTAL DISTANCE (ODO)
: Accumulates the total distance exercised with the bike
from day one. Total distance can be up to 9999 miles.
7.
PULSE RATE (
♥)
: Display the current heart rate.
REPLACE BATTERY:
1. Remove the battery cover on the back of the computer.
2. Replace two 1.5V (AA) batteries.
3. Make sure the batteries are installed correctly and the polarities are correct.
4. If the display is not clear or only partial segments appeared, remove the batteries and
wait for 15 seconds before re-install them.
5. The battery life is approx. 3 months under normal usage.
6. When the batteries are removed, all functional values will reset to zero.
13
