background image

 
 
 
 

TABLE OF CONTENTS 

 

BEFORE YOU BEGIN...................................................................................... 

IMPORTANT SAFETY NOTICES.....................................................................  2 
SMITH MACHINE HARDWARE PACK….......….............................................      4 
SMITH MACHINE ASSEMBLY INSTRUCTIONS.............................................  6 
EXPLODED DIAGRAM…………………………………………………………….. 

18 

SMITH MACHINE PARTS LIST………..…………………………………………..  19 

         

MULTI-PURPOSE BENCH HARDWARE PACK…………………………………     20 

MULTI-PURPOSE BENCH ASSEMBLY INSTRUCTIONS...............................  21 
EXPLODED DIAGRAM……………………………………………………………...  26 
MULTI-PURPOSE BENCH PARTS LIST………………………………………….  27 
WARRANTY.................................................................................................…. 28 
ORDERING PARTS.......................................................................................…  28

 

 
 

 
 
 
BEFORE YOU BEGIN 

 

Thank you for selecting the MARCY TSA-5000 by IMPEX INC.  For your 
safety and benefit, read this manual carefully before using the machine.   
As a manufacturer, we are committed to provide you complete customer 
satisfaction.  If you have any questions, or find there are missing or 
damaged parts, we guarantee you complete satisfaction through direct 
assistance from our factory.  To avoid unnecessary delays, 

please call our 

TOLL-FREE customer service number.  

Our Customer Service Agents will 

provide immediate assistance to you. 

 

 

 

Toll-Free Customer Service Number       

1-800-999-8899 

Mon. - Fri. 9 a.m. - 5 p.m.  PST 

www.impex-fitness.com 

[email protected]

 

Содержание MARCY TSA 5000






























Отзывы: