Impex MARCY PLATINUM MP-2500, Руководство пользователя

Страница: 8 / 31

ASSEMBLY INSTRUCTION
Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen
Wrenches.
NOTE: It is strongly recommended this machine be assembled by two or more
people to avoid possible injury.
STEP 1 (See Diagram 1)
A.) Insert two Guide Rods (#17) into the holes on the Rear Stabilizer (#2). Secure each
Guide Rod with one M10 x ¾” Allen Bolt (#85) and Ø ¾” Washer (#93) from the
bottom. Slide two Ø 2 3/8” Rubber Bumpers (#57) onto the two Guide Rods.
B.) Attach the Vertical Frame (#5) onto the Main Base Frame (#1). Secure it with two
M10 x 2 5/8” Carriage Bolts (#90), one 2 ¾” x 4 ¾” Bracket (#23), two
∅
¾”
Washers (#93), and two M10 Aircraft Nuts (#92). DO NOT tighten the Nuts and
Bolts yet.
C.) Attach the Main Base Frame to the Rear Stabilizer. Secure them together with two
M10 x 3 ½” Carriage Bolts (#89), one 2” x 7” Bracket (#29), two Ø ¾” Washers
(#93), and two M10 Aircraft Nuts (#92).
D.) Slide nine Weight Plates (#66) onto the Guide Rods. Make sure the deep groves on
all the Plates face down and toward the back. Insert the Selector Rod (#18) through
the center hole on the Weight Plates. Slide the Weight Selector Stem (#67) onto the
Guide Rods. Attached the ring on the Weight Plate Selector Pin (#74) to the
Selector Rod (#18).
E.) Use the Weight Plate Selector Pin (#74) to select desired number of Weight Plates
to exercise. NOTE: Each Plate weights approximately 10 lbs. Please refer to the
Weight Resistance Chart on page 28.
7