background image

 
 

TABLE OF CONTENTS 

 

BEFORE YOU BEGIN...................................................................................... 

IMPORTANT SAFETY NOTICES..................................................................... 

HARDWARE PACK……….....…....................................................................... 

ASSEMBLY INSTRUCTIONS........................................................................... 

EXPLODED DIAGRAM.........................................................................………. 

PARTS LIST…………………………………………………………………………. 

10 

WARRANTY.................................................................................................… 11 
ORDERING PARTS......................................................................................... 

11

 

 
 

 
 
 
 
 
BEFORE  YOU  BEGIN 

 

Thank you for selecting the MARCY Multi-purpose Bench MWB-682 by 
IMPEX INC.  For your safety and benefit, read this manual carefully before 
using the machine.   As a manufacturer, we are committed to provide you 
complete customer satisfaction.  If you have any questions, or find there are 
missing or damaged parts, we guarantee you complete satisfaction through 
direct assistance from our factory.  To avoid unnecessary delays, 

please call 

our  TOLL-FREE customer service number.  

Our Customer Service Agents 

will provide immediate assistance to you.

 

 

 
 

 
 
 

 

Toll-Free Customer Service Number       

1-800-999-8899 

Mon. - Fri. 9 a.m. - 5 p.m.  PST 

www.impex-fitness.com 

[email protected]

 

Содержание MARCY MULTI PURPOSE BENCH MWB-682













Отзывы: