manualshive.com logo in svg

Impex MARCY ME-711A, Руководство пользователя

Поделиться
Скачать
Impex MARCY ME-711A Скачать руководство пользователя страница 7

ASSEMBLY INSTRUCTION 

 

NOTE:  It is strongly recommended that two or more people assemble this machine to 
avoid possible injury. 

 

STEP 1 (See Diagram1) 

 

A.) 

Do not tighten Nuts and Bolts until instructed to do so.

 

B.)  Insert the Sliding Frame (#26) into the Main Frame (#1). Thread the Quick Release Knob 

(#24) through selected hole on Main Frame into Sliding Frame to lock the Sliding Frame in 
position. Thread a M8 Leverage Knob (#20) into the Sliding Frame from bottom. 

C.)  Attach the Front Stabilizer (#14) to the Main Frame (#1). Secure it with two M8 x 2 ½” 

Carriage Bolts (#13), two 

∅

 7/8” Curved Washers (#9), and two M8 Acorn Nuts (#19). 

D.)  Attach the Rear Stabilizer (#30) to the Sliding Frame. Secure it with two M8 x 2 ½” Carriage 

Bolts (#13), two Ø 7/8” Curved Washers (#9), and two M8 Acorn Nuts (#19). 

E.) 

Securely tighten all Nuts and Bolts.

 

F.)  Rotate the two Rear Stabilizer End Caps (#29), and adjust the M8 Leverage Knob (#20) on 

the floor completely to stabilize the Bike before exercising. 

DIAGRAM 1 

 

 

 

6 

 

 
 

Содержание MARCY ME-711A



















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды