Impex MARCY ME-709, Руководство пользователя

Страница: 7 / 17

ASSEMBLY INSTRUCTION
NOTE: It is strongly recommended that two or more people assemble this machine to
avoid possible injury.
STEP 1 (See Diagram1)
A.) Do not tighten Nuts and Bolts until instructed to do so.
B.) Insert the Sliding Frame (#26) into the Main Frame (#1). Thread the Quick Release Knob
(#24) through selected hole on Main Frame into Sliding Frame to lock the Frame in position.
Thread a M8 Leverage Knob (#20) into the Sliding Frame from bottom.
C.) Attach the Front Stabilizer (#14) to the Main Frame (#1). Secure it with two M8 x 2 ½”
Carriage Bolts (#13), two
∅
7/8” Curved Washers (#9), and two M8 Acorn Nuts (#19).
D.) Attach the Sliding Frame to the Rear Stabilizer (#30). Secure it with two M8 x 2 ½” Carriage
Bolts (#13), two Ø 7/8” Curved Washers (#9), and two M8 Acorn Nuts (#19).
E.) Securely tighten all Nuts and Bolts.
F.) Rotate the two Rear Stabilizer End Caps (#29), and attach the M8 Leverage Knob on floor
completely to stabilize the Bike before exercising.
DIAGRAM 1
6