STEP 4 (See Diagram 4)
A.) Attach the Leg Developer (#8) to the Leg Developer Holder (#9). Secure it with an Axle
(#42), two M10 x 5/8” Allen Bolts (#56) and
∅
¾” Washers (#62).
B.) Insert two Foam Tubes (#28) halfway through the holes on the Leg Developer. Push four
Foam Rolls (#31) onto the Tubes from both ends. Plug four Foam Roll End Caps (#44)
into the ends.
C.) Slide an Olympic Sleeve (#40) onto the weight post on the Leg Developer. Attach a Spring
Clip (#41) to the Sleeve.
D.) Attach the Arm Curl Handle (#13) to the back holes on the Leg Developer. Secure it with
one 3” Lock Pin (#29). Attach the Abdominal Strap (#14) to the front holes on the Leg
Developer. Secure it with one 3” Lock Pin.
DIAGRAM 4
9
