Impex IGS-8859, Руководство пользователя

Страница: 9 / 15

STEP 3
(See Diagram 3)
A.) Attach the side-holes on the two Backrest Supports (#19) to the pivot on the Main Seat
Support (#3). Align the holes. Secure them together with one M12 x 6 ¾” Allen Bolt (#50),
two Ø 1” Washers (#63), and one M12 Aircraft Nut (#66). Do not over tighten the Nut and
Bolt. Make sure the Backrest Supports are able to swivel.
B.) Attach the Seat Bracket (#12) onto the Main Seat Support. Secure it with two M10 x 2 ¾”
Allen Bolts (#53), four Ø ¾” Washers (#64), and two M10 Aircraft Nuts (#67).
C.) Slide the Sliding Weight Holder (#14) onto the Lat Bar Frame (#8) from the bottom. Insert
the Lat Bar frame into the opening on top of the Front Post (#3) and secure it with a M18 x
Ø3/8” Lock Knob (#36).
D.) Attach the 59” Cable (#48) to a Pulley (46). Attach the Pulley to the opening on top of the
Lat Bar Frame. Secure the Pulley with one M10 x 2 ½” Allen Bolt (#54), two Pulley
Bushings (#47), and one M10 Aircraft Nut (#67).
E.) Draw the Cable over the Pulley to the open bracket on the back of the Lat Bar Frame.
Attach a Pulley to the bracket. Secure it with one M10 x 1 ¾” Allen Bolt (#56), two Ø ¾”
Washers (#64), one L-shaped Bracket (#21) and one M10 Aircraft Nut (#67).
F.) Draw the Cable downward and to the open bracket on the Sliding Weight Holder (#14).
Secure the end of Cable to the bracket with one M10 x 1”Allen Bolt (#57), two Ø ¾”
Washers (#64), and one M10 Aircraft Nut (#67).
G.) Insert a M10 x 2 3/8” Allen Bolt (#55) through the hole on the Lat Bar Frame and secure it
with a M10 Aircraft Nut (#67).
H.) Attach an Olympic Sleeve (#34) onto the weight post on the Sliding Weight Holder. Attach
a Spring Clip (#28) to the Olympic Sleeve.
I.) Connect the Lat Bar (#11) to the Cable with a C-clip (#29). Place the Lat Bar onto the
holder on the Lat Bar Frame.
J.) Remove the entire Lat Bar apparatus and place it in the storage post behind the upright
beams when using the Arm Curl or Leg Developer.
8