background image

STEP 10   (See Lower Cable Loop & Diagram 10) 

 

A.)  Attach the 184” Lower Cable (#45) to the open bracket on the Leg Developer (#6). Attach a 

Pulley (#59) to the bracket. Secure it with one M10 x 1 ¾” Allen Bolt (#95), two 

 ¾” 

Washers (#107), and one M10 Aircraft Nut (#110). 

B.)  Draw the Cable to the opening on the Main Support Frame (#1). Attach a Pulley to the 

opening. Secure it with one M10 x 2 ¾” Allen Bolt (#97) and one M10 Aircraft Nut (#110). 

C.)  Draw the Cable through the opening on the Butterfly Pulley Bracket (#13) to the open 

bracket under the Main Support Frame.  

D.)  Attach a Pulley to the open bracket. Secure it with one M10 x 1 ¾” Allen Bolt (#95), two 

 

¾” Washers (#107), and one M10 Aircraft Nut (#110). 

E.)  Draw the Cable to the open bracket on the Double Floating Pulley Bracket (#16) previously 

installed in Step 9. Repeat Procedure D above to install a Pulley. Draw the Cable around the 
Pulley then downward. 

F.)  Attach the Cable to another Double Floating Pulley Bracket.  Repeat  Procedure D above to 

install a Pulley. Draw the Cable around the Pulley then upward. Let the Double Floating 
Pulley Bracket hanging for now. 

G.)  Draw the Cable to the Upper Frame (#17). Attach a Pulley to the hole on the right side of the 

Upper Frame. Secure the Pulley to the Upper Frame with M10 x 4 3/8” Allen Bolt (#102), 
one Round Pulley Bracket (#39), two Ø ¾” Washers (#107), and one M10 Aircraft Nut 
(#110). 

H.)  Draw the Cable around the Pulley then downward. Connect a Short Chain (#88) to the 

Cable with a Hook (#89). Attach a Hook to the other end of the Short Chain. Let the Short 
Chain hanging for now. 

 

 
 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

24 

 

 

Содержание IGS-6201














































Отзывы: