background image

IMPORTANT SAFETY NOTICE 

 
 
 
 

Please read the entire manual before assembling or operating the equipment.  In 
particular, note the following safety precautions to reduce the likelihood of injury. 

 
 

1.  Children must be supervised at all times and never left unattended with the unit.  
2.  Make sure the surfaces are free of objects that may cause tipping over. 
3.  Place the equipment on level ground, not less than 6 ft (1.8 m) from any structure or 

obstruction such as fence, garage, house, overhanging branches, laundry lines, or 
electrical wires. 

4.  Make sure bystanders are at least 5 feet away from the equipment while it is in motion. 

No one should be allowed to walk close to, in front of, behind, or between moving 
items.  

5.  Do not stand on the Rocking Hammock. This could cause the bed to tip over and result 

in injury. 

6.  The Rocking Hammock is not designed to use by children. 
7.  Maximum user weight is 300 lbs. 
8.  Only one person should be using the Rocking Hammock at a time. 

 
 
 
 
 
 

Care and Maintenance 
 

 

1.  Periodically inspect all parts.  Check all bolts twice monthly during the usage season for 

tightness and tighten as required.  It is particularly important that this procedure be 
followed at the beginning of each season. 

2.  Replace any worn and damaged part immediately.  Check all coverings for bolts and 

sharp edges twice monthly during usage season to be certain they are in place.  
Replace when necessary.  It is especially important to do this at the beginning of each 
new season. 

3.  Use mild household spray cleaners and/or a damp rag to wipe clean. Do not use harsh 

cleaning chemicals. 

4.  Sand rusted areas on tubular members and repaint using a non-lead based paint 

meeting the requirements of Title 16 CFR Part 1303. 

5.  Disposal Instructions – The equipment can be safely disassembled and disposed 

without unreasonable hazards.  Call your local recycle agency regarding details of 
recycling. 

6.  Inspect before and periodically during use for frayed ropes and torn seam.  Call the 

customer service department if any defects were found. 

7.  Inspect before and periodically during use for excessive rust, integrity of the welds, and 

twist in hanging hardware.  Call the customer service department if any defects were 
found. 

 

 
SAVE THESE INSTRUCTIONS. 

 
 

 

Содержание GD-600
















Отзывы: