Impex COMPETITOR WM-357 Скачать руководство пользователя

Страница: 7 / 13

STEP 2 (See Diagram 2)

A.) Plug a Front Leg End Cap (#27) onto the bottom of Front Leg (#5). Attach the Front

Leg to the Main Seat Support (#3). Secure it with three M8 x 5/8” Allen Bolts (#38) and
Ø 5/8” Washers (#44). DO NOT tighten the Bolts yet.

B.) Attach the Main Seat Support to the Cross Brace (#4). Attach the Main Seat Stabilizer

(#10) to the Main Seat Support. Align the holes. Secure the Main Seat Support, Main
Stabilizer, and Cross Brace together with two M10 x 2 ½” Carriage Bolts (#37), Ø ¾”
Washers (#43), and M10 Aircraft Nuts (#48). DO NOT tighten the Bolts yet.

C.) Attach the other end of Main Seat Stabilizer (#10) to the Front Leg (#5). Secure it with

one M8 x 5/8” Allen Bolt (#38) and Ø 5/8” Washer (#44).

D.) Securely tighten all Nuts and Bolts previously installed.

Содержание COMPETITOR WM-357














Результаты поиска

Содержание COMPETITOR WM-357

Отзывы:

Похожие инструкции для COMPETITOR WM-357

Бренды по названию

Популярные бренды

Impex COMPETITOR WM-357, Руководство пользователя

Результаты поиска

Содержание COMPETITOR WM-357

Отзывы:

Похожие инструкции для COMPETITOR WM-357

Бренды по названию

Популярные бренды