INTRODUCTION
The LD910 features a long life heated sensor technology that is designed to
detect all combustible gases including Methane, Propane, Butane, Acetylene,
Alcohol, and Gasoline.
Our unique digital leak size indicator takes the guesswork out of whether to repair
a small leak. The digital display is independent from the audio alarm and sensitivity
level, allowing the precise pinpointing of the leak source.
The LD910 does not require rechargeable batteries.
FEATURES
• Unique numeric leak size indicator
• Long life, stable sensor
• Methane sensitivity <5 ppm
• Automatic calibration and reset to ambient
• Low battery indicator
• 3 adjustable sensitivity levels
• Audio mute function
• Uses 4 AA alkaline batteries
• Intrinsically Safe Certified
• Comfortable Sanoprene grip
• CE Certified
• 2-year warranty includes sensor
• Made in USA
OPERATING INSTRUCTIONS
1. TURN ON:
Press the ON/OFF button once to turn on and again to turn off.
2. WARM UP:
The detector automatically starts heating the sensor. During the
heating cycle, the digital leak size indicator will flash 0 and the detector will sound
a slow “beep”. Warm up time is usually less than 20 seconds.
3. READY:
The detector is ready to begin searching for leaks when the flashing
0 stops and the green sensitivity LED turns on. The audio “beep” increases in
frequency and probe LED begins to blink steadily.
Digital Leak Size Indicator
Low Battery Indicator
Sensitivity Level Indicators
Audio Mute & Sensitivity Level Selectors
Power On/Off
LD910 CONTROL PANEL
2
3
LeakDetectors-LD910-UserManual.indd 2-3
12/7/16 1:08 PM
