14
SAFETY TIPS:
1) ALWAYS CHECK FOR LEAKS AFTER EVERY LP TANK CHANGE.
2) ALWAYS CHECK FOR LEAKS BEFORE EACH USE.
3) USE LONG BBQ TOOL TO AVOID BURNS.
4) CHECK ALL GAS SUPPLY FITTINGS FOR LEAKS BEFORE EACH USE. IT
IS HANDY TO KEEP A SPRAY BOTTLE OF SOAPY WATER NEAR THE
SHUT-OFF VALVE OF THE GAS SUPPLY LINE. SPRAY ALL THE FITTINGS.
BUBBLES INDICATE LEAKS.
5) DISCONNECTED L.P. CYLINDERS MUST HAVE THREADED VALVE PLUGS
TIGHTLY INSTALLED, AND MUST NOT BE STORED IN A BUILDING,
GARAGE, OR ANY OTHER ENCLOSED AREAS.
6) TURN OFF ALL CONTROL KNOBS AND LP TANK VALVE WHEN THE
GRILL IS NOT IN USE.
7) IF THE APPLIANCE IS STORED INDOORS, THE LP TANK MUST BE
DISCONNECTED AND REMOVED FROM THE GRILL.
8) LP TANKS MUST BE STORED OUTDOORS IN A WELL-VENTILATED AREA.
DISCONNECTED LP TANKS IN STORAGE OR BEING TRANSPORTED
MUST HAVE A SAFETY CAP.
9) NEVER LEAVE A LP TANK IN A RECREATIONAL VEHICLE OR BOAT
WHICH MAY BECOME OVERHEATED BY THE SUN.
10) DO NOT STORE LP TANK IN OR NEAR AN AREA WHERE CHILDREN
PLAY.
11) FOR ANY OTHER PROBLEMS, SEE “TROUBLESHOOTING” OR CONTACT
OUR SERVICE CENTER.
At least 36” clearance maintained from combustible constructions to the sides
and back of this grill.
There is no combustible construction material over the grill.
All internal packaging removed.
Burners are sitting properly on orifices.
Knobs turn freely.
The regulator & hose connected to grill are provided by the manufacturer. (Pre-
set for 11.0” water column).
Unit tested and free of leaks.
User informed of gas supply shut off valve location.
LEAK TESTING
FINAL INSTALLATION CHECKLIST
