Imperial Bracket Mounted Basin, Руководство по установке

Страница: 9 / 12

Installing the basin (Basin Bolt attachment)
For brickwork or tile wall installations, basin bolts (provided) are required. Drill 12mm
mounting holes at the marked locations on the finished wall for the basin.
Install the basin bolts (provided) in the wall so they extend 25mm beyond the finished wall.
Fit the taps and waste to the basin. We recommend a qualified plumber carry out this procedure.
Position the pedestal on the floor. Carefully set the basin on the pedestal so the hanger bolts
extend through the basin anchoring holes.
Install the nuts (provided) to the hanger bolts. Level the basin and carefully tighten the nuts
until secure. Do not over tighten as this will cause stress to the ceramic.
Connect and tighten the waste to the drain. Complete the water supply connections to the basin.
Consult a qualified plumber to assist with this.
Run water supply into the basin and check for leaks, faults or any other anomalies.
Optional: Apply silicone sealant around the pedestal foot to stabilize.
Installation Guide
Pedestal and Semi-Pedestal Guidelines
Nuts