4 of 6
Installation Instuctions
1. Assemble the diverter (1) to the shower pipe (2) using the 1/2” supplied
washer.
2. Assemble the wall bracket (3) to the diverter body and connect the 1/2”
nut (4) to the wall.
3. Take the wall bracket (5) and position it to the upper side of the pipe, mark
the hole on the wall and fix it with the supplied screws.
4. Cover the wall bracket with the cover plate (6).
Adjust the height of the shower pipe using the nut (A).
NOTE: Riser pipework MUST not be cut.
