background image

11

If dispensing ice continuously, dispenser motor is
designed to shut off after 3 to 5 minutes. Motor resets
after 3 minutes and dispensing can continue.

A slight delay occurs when switching between cubed and
crushed modes. Pieces of crushed ice will vary in size
and shape. "Snow" may form on door and ice chute when
repeatedly dispensing crushed ice. Allow "snow" to
evaporate or wipe dry.

Dispenser operates only with cubes of proper size and
crescent shape. Do not add purchased ice cubes or other
shaped cubes to ice bucket.

Removing Ice Bucket

• Remove ice bucket by lifting bucket and pulling out.
• Replace ice bucket by sliding in until bucket locks in

place. Ice bucket must be locked in place for proper
ice dispensing. If freezer door does not close, bucket is
not in proper location.

Dispenser Light

A light is activated when dispensing ice or water.

Taste and Odor

Observe the following to minimize taste and odor
difficulties:
• Wrap foods in tightly sealed containers or moisture

proof bags.

• Contact local water treatment company for

specialized help if difficulties persist.

• See 

Water Filtration System Installation and Operating

Instructions for replacement procedure.

Содержание 2699A





















Отзывы: