impeco JET STEEL, Руководство пользователя

Страница: 4 / 7

JET STEEL MANUAL
/ Read the instructions before the assembly and use of the device.
1. WARNING
• The dryer should be installed by a duly authorised person.
• The power supply must be cut off before installation.
• An improperly grounded device may cause electric shock.
• The dryer should be connected via a 3-core power supply wire.
• Any repairs carried out by people who do not have the right to do so on their
own may result in the loss of warranty.
2. NOTE
• Do not install the device near a sink. If the power cord is damaged, the device
should not be mounted. In this case, contact the manufacturer or dealer. Conne-
-ction directly to the electrical system without the plug is permitted and does not
affect the warranty conditions, but should be made by a person with an electrical
license and in accordance with current regulations.
• The dryer should be mounted on a solid, durable and stable wall. Do not install
the dryer on a surface made of flammable material.
• In the case of the failure of the dryer, remove the plug from the mains immedia-
tely and contact your dealer.
3. SPECIFICATIONS
Dimensions (mm) | 730 x 300 x 220
Voltage | 220-240V, 50/60 Hz, 1650W
Blast speed | 95 m/s
Drying time | 7 s
Splash-proof performance | IPX4
Protection class | I
Nozzle | NO
Noise level: 70 dB
Casing | stainless steel + ABS plastic
HEPA filter | YES
4. INSTALLATION
1/ Installation should be carried out in accordance with the regulations for
assembly of electrical equipment and by a person with appropriate qualifi-
cations.
2/ Using the template supplied with the kit, mark the position of the 6 screws
with which the metal wall-fixing bracket will be mounted.
3/ Drill holes and fix the bracket to the wall at the desired location.
4/ Hang the dryer, mark the position of the two lower screws with which the
lower part of the dryer is mounted to the wall.
5/ Use the supplied screws to fix the lower part of the dryer to the wall.
6/ Put the plug into the socket and the dryer is ready to use.
5. USAGE
• non-contact actuation (photocell)
• place your hands under the hand dryer - the device will turn on automatically
• rub your hands against each other
• the device switches off when you take your hands
6. CLEANING AND MAINTENANCE
Clean the dryer regularly using a damp cloth soaked in water with soap.
Do not clean with acids or alkalis, do not pour with water.
7. WARRANTY
The dryer is covered by a 24-month warranty . In the case of failure, the device
must be delivered to the manufacturer or distributor who sold it, together with
the proof of purchase.
JET STEEL
5 / EN