Impecca IWAH08-KRA Скачать руководство пользователя страница 10

ENGLISH

–10–

PMTS — FOLLOW ME

P

ersonal 

M

apping 

T

emperature 

S

ensor: Your model may be 

equipped with a special feature that allows the remote control to 

act as a thermostat.  If your unit shows this PMTS LED on the control 

panel, and you have the accompanying LCD remote control then 

your unit is equipped.  
You must activate this feature through the remote control by press-

ing the PMTS button.  Once activated, it is important to keep the 

remote aimed at the air conditioner and place it in the center of the 

room for best results. 

ENERGY SAVER MODE

This function is available on COOL mode. The fan will continue 

to run for 3 minutes after the compressor shuts off. The fan then 

cycles on for 2 minutes at 10-minute intervals until the room tem-

perature is above the set temperature, at which time the compres-

sor turns back on and Cooling Starts. Note that due to modern 

energy saving regulations, this mode is on by default and you 

must turn it off if you want the fan to run constantly during cooling 

mode.

SLEEP MODE

While in cooling mode, this function will cause the selected tem-

perature to increase by 2°F (or 2°C) 30 minutes after the function 

is selected. The temperature will then increase by another 2°F (or 

2°C) after an additional 30 minutes. This new temperature will be 

maintained for 6 hours before it returns to the originally selected 

temperature. This ends the Sleep mode and the unit will continue 

to operate as originally programmed. While in heating mode, the 

sleep function will perform the same function in reverse by de-

creasing the temperature by 2°F (or 2°C), for 30 minutes, etc. The 

Sleep mode program can be canceled at any time during opera-

tion by pressing the Sleep button again.

CHECK FILTER

This feature is a reminder to clean the Air Filter for more efficient 

operation. The LED (light) will illuminate after 250 hours of opera-

tion. To reset after cleaning the filter, press the Check Filter button 

and the light will go off. See section under Cleaning and Mainte-

nance for how to clean the filter.

Note: Your filter may need to be cleaned much more often in especially 

dusty environments and may not need to be cleaned as often in especial-

ly clean environments.  The 250 hour indicator is just there as a reminder.

Ion

Heat

PMTS

PMTS

PMTS

Содержание IWAH08-KRA

































Отзывы: