Impecca DVHP9116, Руководство пользователя, Страница: 19 / 20

- 18 -
TROUBLESHOOTING
Problem Solution
The Power light does not come on 1. Plug the power cord into a wall outlet.
2. Try a different wall outlet.
No picture 1. Select the appropriate video input format on your TV in
order
to receive the player’s output signals.
2. Fully insert the plugs on the video cable into the
corresponding jacks.
No sound 1. Fully insert the plugs on the audio cable into the
corresponding jacks.
2. Switch on the stereo system (if applicable).
3. Select the correct output in the setup menu.
Distorted picture 1. Remove and clean the disc
2. Some distortion may occur during the FWD and REW
operations. This is normal.
Flickering or unstable brightness. 1. Connect the player directly to your TV.
NOTE: Disruptions can be caused by copy protection
systems on a DVD or CD.
The player does not operate. 1. Be sure that a disc is loaded.
2. Be sure that the disc is compatible (check the disc’s
format and color signal coding standard).
3. Check that the disc is correctly loaded.
4. Clean the disc.
5. Be sure that the DVD player settings are correct.
No response when buttons are
pressed.
1. Switch off the DVD player, unplug the power cord, and
then plug in the power cord and switch it on again.
The remote control handset does not
work.
1. Point the reote control handset at the sensor.
2. Check that the remote control is no more than 7 meters
from the sensor
3. Replace the batteries with new batteries.
If you experience any issues that are not listed above, or if you are unable to resolve your issue after trying the
methods and solutions described above, please contact Impecca technical support team:
Email: service@impeccausa.com
Website: www.impeccausa.com