3
1.
Unfold the frame, and stand it on its back.
A
2.
Choose the plexiglass’s glossy or matte
side. With that side facing up, fit the top of
the plexiglass into the tabs at the top of the
frame.
B
3.
Align the plexiglass’s side holes with the
frame’s holes.
4.
Insert a wing nut screw through the bottom
of the frame, and screw it on until secure.
Repeat on the other side.
C
5.
Remove the nut from a plexiglass hook.
Insert the threaded tip of the hook into the
plexiglass sheet, and screw the nut back
onto the hook. Repeat on the other side.
D
6.
Bend the bottom edge of the plexiglass and
secure the hooks around the front bar of the
metal frame.
E
Check the hooks' nuts to
make sure they're secure.
7.
Stand the assembled shooting table on
its feet, and remove the protective plastic
covering from the plexiglass.
Instructions
B
C
A
D
E
