3
Setting Up Your Background Support System
Page 6
Page 3
10M
25M
50M
75M
100M
10Y
25Y
50Y
75Y
100Y
Start with one of the stands. Unlock the
legs by turning the knob counter-clockwise.
Spread the leg sections, but maintain a low
center of gravity. Re-tighten the knob.
Raise the height of the stand by unlocking
the sections. Start with the lowest knob,
and raise each section to your desired
height. Re-tighten each knob.
1
2
Configure the second stand to match the
first.
Place the two stands approximately
where you want the backdrop to hang.
You’ll be able to adjust them once you get
the cross bar in place.
3
4
It’s a good practice to secure the legs of
your background supports with a sandbag
or weight bag.
13
14
A cloth background ready for shooting.
A seamless paper background ready for
shooting.
15