5
CONTROL PANELS
9. POWER LED (green)
Illumination of this led indicates that
the
amplifier
is
operating
normally.
10. PROTECTION LED (red)
Illumination of this led indicates that a short
circuit exist somewhere in your system. The
amplifier turns off.
11. RCA LINE OUTPUT JACKS
Line out signal is automatically set by the
position of the amplifier crossover select switch
(5).
When amplifier crossover switch is in
LOW
position (i.e. 150 Hz), line output signal is
automatically set in
HIGH PASS
mode at 150
Hz.
When amplifier crossover switch is in Full
position line output signal is Full Range
When amplifier crossover switch is in
HI
position
(i.e. 200 Hz), line output signal is automatically
set in
LOW PASS
mode at 200 Hz
12. BASS BOOST REMOTE CONTROL PHONE
JACK
Connecting the optional remote controller
(HC-R2) to this plug, you can set the bass boost
while driving
