GA_EN_Zusatz_SS1mitMotor_Rev0;
Datum:
10/2018
Page
6
5. Preparation for travel with the 4-cycle motor drive
- Pull out locking pin on the flange
- Insert the 4-cycle-motor drive into the free opening of the roller axle in the SS1
- Push in locking pin until it stops
4-cycle Honda motor with forward and re-
verse gears
- The motor can be removed by loosening the locking pin and pulling the motor away.
It must be ensured that the locking pin is correctly locked and so the motor cannot
fall out.
During travel, the counterpressure roller must turn on the cable.
IMMOOS self-driven carriage type SS1
The hook of the safety line must be attached at a suitable place for every action.
