www.immersionrc.com
For example to change the Low Battery 100mV setting:
Button pressed for > 5 seconds
Dash Dot Dot
- second menu item –
press button briefly to enter setting
Dot
-
current setting (auto)
Dot
- first available option -
0.0v
press button briefly
Dot Dot
- second available option -
100mV
press button briefly
At this point the Low Battery 100mV setting has been changed to ‘100mV’. The module will now
continue with the next item in the menu, and continue to the end of the list. Once the end of the list is
reached, the receiver will automatically exit the programming mode signaled by two short beeps.
Beep Codes
Beep Code
Menu
Menu Choices
- .
Low Batt Volts
1 – Auto (for 2S or 3S LiPo)*
2 – 6v
3 – 7v
4 – 8v
5 – 9v
6 –10v
7 – 11v
8 – 12v
Default: 6V for 2S, 9V for 3S
- . .
Low Batt 100mV
1 – 0.0v …. 10 – 0.9v
Default: 0.5v (for threshold of 9.5v)
(Ignored in Auto mode)
Note that * indicates the default value .
