Certification
The CE, FCC, and other certificates for the integrated Bluetooth module are available from here:
https://www.immersionrc.com/fpv-products/laprf/
Note that these certificates only apply when the internal antenna is used.
For resellers, or anyone who has to ship the device, the documents required by shipping services for
battery safety are also provided at the link above.
Firmware Update
- Install a fully charged battery
- Ensure that the timer is turned off
- Press and hold the
Bind
button, while pressing the
Power
button. The status led will blink
rapidly.
- Connect the timer to a PC with the USB cable.
- Run the ImmersionRC ‘Vortex Configurator’ Chrome application
- Press the
Flash Firmware
button, and point to the firmware file downloaded from the
ImmersionRC website
product page
for the LapRF.
Battery Charging
While charging, the ‘Charge’ LED under the puck acts as a 4 level battery gauge.
One short flash indicates a battery that is below 25%, two for 50%, three for 75%, and a solid indicator
indicates a battery that is fully charged.
20
