Immergas UB INOX 120 V2, Инструкция и рекомендации

Страница: 12 / 16

12
3-2
1
2
222
4
4 3
4
5
5
INS
TALLER
US
ER
MAINTEN
AN
CE TECHNI
CI
AN
3.3 CASING REMOVAL.
To facilitate storage tank maintenance, the casing
can be completely removed as follows:
N.B.: the casing removal procedure is the same
for all storage tank unit models.
- remove the lid (1) pulling it upwards;
- loosen the screws (2) and pull the front panel
outwards (3);
- loosen the screws (4) of the side pieces (5)
positioned on the top and in the lower part
of the side pieces themselves. After having
released them from the screws, they can be
removed by pulling them forward and then
upwards.
3.4 REPLACING THE ANODE.
The magnesium anode (Part. 3 Fig. 1-6), present
in the storage tank, must be replaced every year
with another having the same features.
3.5 TECHNICAL DATA.
UB INOX 80 V2 UB INOX 120 V2 UB INOX 200 V2
Storage tank useful capacity l 83.9 128.8 199
Domestic hot water side maximum pressure bar 8 8 8
DHW side maximum temperature °C 99 99 99
Domestic hot water expansion vessel l 4.0 5.0 8.0
Dispersions kWh/24h 1.35 1.51 1.87
Psbsol W/K 1.25 1.39 1.73
Coil thickness mm 0.8 0.8 0.8
Coil length mm 10350 - -
Lower coil length mm - 3850 6500
Upper coil length mm - 8400 10700
Coil exchange surface m
2
0.65 - -
Lower coil exchange surface m
2
- 0.24 0.41
Upper coil exchange surface m
2
- 0.53 0.67
Coil capacity l 2.75 - -
Lower coil capacity l - 1.02 1.73
Upper coil capacity l - 2.23 2.84
Primary fluid flow rate (coil) l/h 1030 1325 1390
Coil head loss at 1000 l/h kPa (m H
2
O) 13.2 (1.35) 7.1 (0.72) 8.3 (0.85)
Central heating side maximum pressure bar 6 6 6
Central heating side maximum temperature °C 90 90 90
Heat exchange maximum output kW 23.9 30.8 32.3
Reintegration heat output kW 15.7 18.8 20.2
Full weight kg 153.65 202.15 303.97
Empty weight kg 70.9 78.9 99.4
Total water content l 82.7 123.25 204.57