ImmediaTV ITV-XC440c, Руководство пользователя

Страница: 85 / 92

85
The configuration parameters are:

Device Name: This field controls the top-level name of the device in the Dashboard tree.
It defaults to “Modular Transcoder”. Changes to this field take effect immediately.

IP Configuration: This field selects the control port IP configuration mode, as follows:
o
Static IP: This option selects a static IP address, specified by the IP Address,
Subnet Mask, and Default Gateway fields.
o
DHCP: This option selects control port IP address configuration by DHCP. If
this option is selected, the IP Address, Subnet Mask and Default Gateway fields
are not shown.

IP Address: This field is only shown if IP Configuration is set to Static IP . Enter the
desired control port IP address. Please note that the MVN-XC440 uses a block of 4 IP
addresses for internal communication; these addresses cannot be used for the external
network interfaces. The reserved addresses are:
o
10.253.254.252
o
10.253.254.253
o
10.253.254.254
o
10.253.254.255
Please contact ImmediaTV Corporation if this is an issue for your network.

Subnet Mask: This field is only shown if IP Configuration is set to Static IP . Enter the
desired control port subnet mask.

Default Gateway: This field is only shown if IP Configuration is set to Static IP .
Enter the desired control port default gateway.

NTP Server: If you want the unit to be NTP-synchronized (for logging purposes), enter
the IP address of an accessible NTP server in this field. If you do not need NTP, you can
leave this field at 0.0.0.0. If your ITV-XC440c has access to the Internet through the
control port, you can point it to one of the public NTP servers for your region. You can
find more details on this link:
http://psp2.ntp.org/bin/view/Servers/WebHome

Apply/Cancel: Use these buttons to apply or cancel the changes to the control port IP
configuration. Note that if you change the IP address, DashBoard may lose contact with
the ITV-XC440c. The IP Address, Subnet Mask and Default Gateway entries will be
checked for consistency and will be rejected if invalid.
Control Port Statistics Tab
The Control Port statistics screen is depicted below. It contains the current settings for the
control port. If you have configured the unit for DHCP, it will include the current IP Address,
Subnet Mask and Default Gateway obtained from the DHCP server. It also includes the link
state for the individual control Ethernet ports, and an indication of which control port is currently
active.