Immax NEO Smart remote v2 Zigbee 3.0
LIGHTING DEVICES CONTROL VIA APP
1. When initially power on the Lighting device:
- Lighting Device will start breathing smoothly in cold white color,
and wait to be connected to Gateway via App (During this breathing
time, Lighting device can NOT be paired directly to the remote).
- After been successfully connected to Gateway, Light will stay in
steady cold white and brighter. Now user can use app to control the
Light normally!
LIGHTING DEVICES CONTROL VIA REMOTE
Connecting Process:
We provide 3 flexible methods for consumers to use Remote to con-
trol Light(s). Below Method A and Method B is when user ALREADY
add the Light into app. Method X is for those Light(s) which has
NOT been added to App.
METHOD A (ONLINE PAIRING MODE)
Step1. Long press “ON”and “OFF”button at the same time for 5
secs then small indicator of the remote will slow flash.
Step2. Use App to pair the remote to the gateway.
Step3. For the first time, user needs to wake up remote by long
pressing“Dim up”and “Dim Down”button at the same time for no
less than 5 secs until small indicator fast flashing.
Step4. Link Light(s) to the remote via app, then remote can control
light normally!
METHOD B (OFFLINE PAIRING MODE)
Put the remote VERY close to the bulb and long press “ON” button
of the remote until Light breath for 3 times. Then the light will be
removed in the gateway and link directly to the remote.
Note: Method B can only pair ONE Light at a time, and can maxi-
mumly connect and control 30 lights.
- Method X (No App connected):
Before you try Method X, please make sure the Light NOT in contin-
uously breathing status.
We can always use Remote to connect to Light by long pressing
“ON”button until it breath for 3 times.
CONTROL PROCESS
Please see below snapshot of 4 simple functions that our remote
now supported after you connected the Light to the Remote.
DISCONNECT PROCESS
1. If user previously used Method A and already added both Remote
and Lights to the App, then user can directly edit to delete the light
in the Remote page.
2. If user previously used Method B or Method X for connecting,
Then he need to put the Remote very close to the Light and long
press “OFF”button until Light breath smoothly for 3 times, which
proves disconnecting completed.
DOWNLOAD THE IMMAX NEO PRO APPLICATION
USER MANUAL
Manufacturer and importer:
IMMAX, Pohoří 703, 742 85 Vřesina, EU | www.immaxneo.cz | www.immaxneo.com
Made in P.R.C.
