15
7. THERMOSTAT START-UP
After inserting the batteries, thus powering the thermostat, press the reset button (R) for 2-3 seconds with a pencil point. All
the available cursors and symbols will then be displayed for a few seconds (self-test). The thermostat is then ready for CLOCK
SETTING.
NOTE:
For a PROPER use of our product, from here on all the instruction paragraphs should be read in SEQUENCE, as per
manual!
8. CLOCK SETTING
During this step, the display shows two hour-digits and two
minute-digits. The first digit on the left will blink (fig. 1).
By switching down or up the micro-switches positioned under
the digits from “0 to 9”, the current time is set.
The following example shows how to set 09:55 a.m.:
• Switch the micro-switch “0” to set the first digit on the display
(the second digit will blink) (fig.2).
• Switch the micro-switch “9” to set the second digit on the
display, thus completing the HOUR setting (the third digit will
(fig. 1)
LIBR. DUO PLUS INGLESE standard 24-01-2000 14:46 Pagina 16