Face lcon Display Mode
To remove,or display, comfort level indicator(face icon)single press“SET”button.
How to Calibrate:
(Note:Calibrations will be reset when battery is removed.)
a. To access calibration mode, press both “SET”and “△” buttons simultaneously
for at least 5 seconds, until display shows calibration page. Then release
buttons.
b. Press“SET” to switch between C/F, temperature and humidity settings.
c. Press “△” to change or calibrate the data value higher or lower than the
actual reading.
d. New settings are saved automatically after 10 seconds. To reset system to
manufacturer ’s settings, remove and replace battery.
77
.0
