background image

 

 
 
 

____________________________________________________________________________________ 

STI S.r.l.

 

– Via Dei Caravaggi 15, 24040 Levate (BG) – ITALY        www.imi-critical.com 

 
Manual 2071, rev.07 02/2019 

– BV

 

 

15 

6.2  Intended use 

 
BV  is  produced  by  STI  S.r.l.  (Manufacturer)  and  identified  by  a  label.  STI  S.r.l.  will  not  be  liable  for  any 
possible damage or physical injury resulting from use in other than the designated applications or by lack of 
care during installation, operation, adjustment and maintenance of the machine. Such risks lie entirely with 
the  user.  Depending  on  the  specific  working  conditions,  additional  precautions  may  be  requested. 

Considering  that  STI  S.r.l.  has  no  direct  control  over  particular  applications,  operation  or  maintenance 
conditions

, it is the operator’s responsibility to comply with all applicable safety rules. Please inform STI S.r.l. 

urgently if you face unsafe situations not described in this Instruction Manual. It is the sole responsibility of 
the operator to ensure that the local health and safety regulations are adhered to.  
BV is designed in accordance with the applicable International Rules and Specifications, but the following 
Regulations must be observed in any case:  

the general and safety regulations;  

the plant specific regulations and requirements;  

the proper use of personal and protective devices (glasses, clothing, gloves, etc);  

the proper use of tools and transport equipment. 
 

6.3  Reasonably foreseeable misuse 

A short list of reasonably foreseeable misuse: 

installation  in  ambient  with  not  planned  conditions:  i.e.  climatic  conditions  different from  the  specified 
conditions; 

Insert incorrect fluid into the system; 

supply pressure out of required range. 

 

6.4  Operating limits 

 
The label fastened on the BV contains the main BV operating conditions for the specified application. 

 

 

Warning 

It is severely forbidden to use the BV for purpose or application other than those for 
which it was designed and here above specified. 

Warning 

It is severely forbidden to use the BV under conditions other than those provided 
on the label. 

Содержание STI BV


























Отзывы: