IMI EX640B71D, Инструкция по установке и эксплуатации

Страница: 18 / 26

Model Number
EX640B71D
LOOP POWERED, CURRENT OUTPUT, INDUSTRIAL VIBRATION SENSOR
Revision: NR
ECN #: 42927
[5]
Performance ENGLISH SI
Measurement Range 0.0 to 1 in/sec pk 0.0 to 25.4 mm/s pk
[1]
Output 4-20 mA 4-20 mA
Frequency Range(± 3 dB) 180 to 60,000 cpm 3 to 1000 Hz
[2][3]
Broadband Resolution 0.005 in/sec pk 0.13 mm/s pk
[4]
Non-Linearity ± 1 % ± 1 %
Environmental
Temperature Range -40 to 176 °F -40 to 80 °C
Hazardous Area Approval
Ex d IIC T4 Gb, -20°C
≤
Ta
≤
+80°C, II
2 G
Ex d IIC T4 Gb, -20°C
≤
Ta
≤
+80°C, II
2 G
Electrical
Excitation Voltage 12 to 30 VDC 12 to 30 VDC
Settling Time(within 2% of value) <15 sec <15 sec
Electrical Isolation(Case)
>10
8
Ohm >10
8
Ohm
Physical
Size (Hex x Height) 3.85 in x 5.52 in 98 mm x 140 mm
Weight 1.2 lb 544 gm
Mounting Thread 1/4 NPT No Metric Equivalent
Sensing Element Ceramic Ceramic
Sensing Geometry Shear Shear
Housing Material Stainless Steel Stainless Steel
Electrical Connector Removable Screw Terminals Removable Screw Terminals
Electrical Connection Position Top Top
Electrical Connections(Tab 1) 4-20 mA Pos (+) 4-20 mA Pos (+)
Electrical Connections (Tab 2) 4-20 mA Neg (-) 4-20 mA Neg (-)
Screw Terminal Wire Size 12-24 AWG 3.0 - .2mm²
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without
notice.
ICP
®
is a registered trademark of PCB Group, Inc.
OPTIONAL VERSIONS
Optional versions have identical specifications and accessories as listed for the standard model
except where noted below. More than one option may be used.
RV
- Buffered Analog Signal Output - 100 mV/g (±20%)
Electrical Connector Removable Screw Terminals Removable Screw Terminals
Electrical Connections(Tab 1) 4-20 mA Pos (+) 4-20 mA Pos (+)
Electrical Connections (Tab 2) 4-20 mA Neg (-) 4-20 mA Neg (-)
Electrical Connections (Tab 3) Signal Output Pos Signal Output Pos
Electrical Connections (Tab 4) Signal Output Neg Signal Output Neg
TO
- Temperature Output [6]
Temperature Output Range -40 to +125 °C -40 to +125 °C
Electrical Connector Removable Screw Terminals Removable Screw Terminals
Electrical Connections(Tab 1) Vibration, 4-20 mA Pos. Vibration, 4-20 mA Pos.
Electrical Connections (Tab 2) Vibration, 4-20 mA Neg. Vibration, 4-20 mA Neg.
Electrical Connections (Tab 3) Temperature, 4-20 mA Pos. Temperature, 4-20 mA Pos.
Electrical Connections (Tab 4) Temperature, 4-20 mA Neg. Temperature, 4-20 mA Neg.
NOTES:
[1] Conversion Factor 1 in/sec = 0.0254 m/sec.
[2] Current will fluctuate at frequencies below 5 Hz.
[3] 1Hz = 60 cpm (cycles per minute).
[4] Typical.
[5] See PCB Declaration of Conformance PS039 for details.
[6] Can not be combined with RV option.
SUPPLIED ACCESSORIES:
Model ICS-4 NIST-traceable single-axis amplitude response calibration from 0 cpm (0 Hz) to
upper 10% frequency for 4 - 20 mA output vibration sensor (1)
Entered: AP Engineer: GD Sales: BRS Approved: BAM Spec Number:
Date: 5/15/2014 Date: 5/15/2014 Date: 5/15/2014 Date: 5/15/2014
58978
3425 Walden Avenue, Depew, NY 14043
Phone: 800-959-4464
Fax: 716-684-3823
E-Mail: imi@pcb.com