By using the handle located at the inside or outside of the right arm the
footrest can be unfolded and the back can be regulated into rest positions.
The glide/rocker function is locked as long as the footrest is unfolded.
The built-in footrest can be unfolded by pushing the handle placed inside
of the right arm - towards the back. To fold inn the footrest you should use
your feet to press the footrest down towards the chair and move your
bodyweight forward in the chair. Note: The handle must be in front position
to fold in the footrest. If the chair is equipped with an outside handle please
move the handle backward to unfold the built in footrest. To fold in the
footrest you should use your feet to press the footrest down in combination
with moving the handle forward.
Do not use shoes directly against the footrest. This might cause damage to
the cover/upholstery. Do not sit on the armrests. Never lift/carry the chair
by the back or the footrest. Lift the chair by grabbing under the chairs arms,
base or backside. Two persons are recommended to lift/carry the chair.
A
B
“CLICK”
STEP 1
Take the center arm and attach the 4 flanges (2 on each side) as shown in
the line drawing. It is two type of flange and the one in the front will be
marked FRONT on the flange.
STEP 2
Remove the connection protectors on the back and the flanges/brackets
protectors on the seat.
IMG Relaxers are delivered with separated back and seat. The back
is ready for assembly. Please proceed with the following steps:
STEP 3
Attach the back by sliding the connectors into the flanges/brackets on the
back part of the seat. Press the back down until you hear “click”. Please
ensure that you don’t tear the skirt cover or that the skirt cover gets
squeezed between the back and the seat.
STEP 4
Use the Velcro tape to fasten the skirt cover onto the lower part of the chair
(the cover goes from the back to the back rail frame).
RELAXER, ASSEMBLY INSTRUCTIONS
RELAXER, USER INSTRUCTION
PLEASE READ THIS INFORMATION CAREFULLY BEFORE YOU
ASSEMBLE AND USE THE CHAIR.
UNFOLDED FOOTREST (OUT)
The back angel can be
adjusted from upright to rest
positions
The glide/rocker function is
locked when the footrest is
unfolded (out)
With 360 swing function
You can adjust the neck
and head support
•
•
•
•
FOLDED FOOTREST (IN)
The back is locked in
upright position.
The glide/rocker function
can be operated.
With 360 swing function.
You can adjust the neck
and head support.
•
•
•
•