
Fig. 4
STEP 4
Slip one ottoman up-right (G) into slot on ottoman ring (I) and put the second
ottoman up-right into other slot. If needed use a rubber hammer to hit softly
on top to get the cross in place as shown in fig. 4.
TRINN 4
Plasser beina på taburetten (G) inn i sporet på ringen (I) på hver sin side.
Dersom det er nødvendig, bruk en gummihammer eller handflaten for å presse
den på plass som vist på fig. 4.
Fig. 3
STEP 3
Use hex key (E) to tighten each screw securely as shown in fig. 3 to finish the
ringbase.
TRINN 3
Stram til skruene.
Fig. 2
STEP 2
Place the second plate (C) on ring base. Position ringbase center (A) on top
of plate shown in fig. 2.
TRINN 2
Plasser den andre platen (C) mellom topp treverk og svingsenter (A) vist på
fig. 2.
Fig. 1.
STEP 1
Begin by inserting 5 long screw (D) through holes on plate (C) under
bottom of ring base (B) as shown in fig. 1.
TRINN 1
Plasser skruer (D) gjennom hullene på platen (C) på undersiden av
ringsokkelen (B) som vist på fig. 1.
RING BASE ASSEMBLING / RINGSOKKEL MONTERING
A
Ringbase center /
Sving senter x 1
RING BASE CHAIR / RINGSOKKEL
B
Ringbase Chair /
Ringsokkel x 1
C
Plate x 2
D
Screw M8x50 /
Skru M8x50 x 5
E
Hex Key /
Umbraconøkkel x 1
M
Hex Key x1
F
Finished Ring Chair Base /
Ferdig ringsokkel
H
Top Plate Ottoman x 1
G
Ottoman up-rights x 1
RING BASE OTTOMAN / RING TABURETT
I
Ring Base Ottoman x 1
J
Dome screw x 4
N
Finished Ring Ottoman
L
Screw M6 x 2
K
Stud M6 x 2
STEP 7
Insert stud M6 (K) through top plate and holes on ottoman up-rights and use
dome screw (2 pcs.) to tighten and lock top plate with cross ottoman. Fig. 7.
shows finished ring ottoman.
TRINN 7
Gjengebolt M6 (K) plasseres gjennom topplaten (H) og hullene på beina, og
bruk begge møbelknappene (J) for å låse topplaten fast til beina. Fig. 7. viser
den ferdige taburett ringen.
Fig. 7
STEP 5
Use hex key (M) to tighten screw M6
(L) to lock between ottoman ring (I)
and ottoman up-right (G) as shown in
fig. 5.
TRINN 5
Stramme skruene som låser beina
(G) fast til ringen (I) som vist på fig. 5.
STEP 6
Put top plate (H) on top of the
ottoman up-rights as shown in fig. 6.
TRINN 6
Topplaten (H) plasseres på toppen av
beina jfr fig. 6.
Fig. 5
Fig. 6