Introduction
Unpacking:
Thank you for purchasing the MINICUBE-60.
Every fixture has been thoroughly tested and has been shipped in perfect
operating condition. Carefully check the shipping carton for damage that may
have occurred during shipping. If the carton appears to be damaged,
carefully inspect your fixture for any damage and be sure all accessories
necessary to operate the unit has arrived intact. In the case damage has
been found or parts are missing, please contact the manufacturer or your
dealer for further instructions. Do not return this unit to your dealer without
first contacting.
Warning!
To prevent or reduce the risk of electrical shock or fire, do not
expose this unit to rain or moisture.
Caution!
There are no user serviceable parts inside this unit. Do not attempt
any repairs yourself; doing so will void your manufactures warranty. In the
unlikely event your unit may require service please contact the manufacturer
or your dealer.
Features:Technical Specification
◇
Extremely small, fast and powerful LED moving beam.
◇
DMX Channels:
69
/2
7
/2
3
/
8
CH
◇
Pan: 540°, speed adjustable; Tilt: 360° continuous rotation
◇
Each LED and LED stripe can be controlled individually
◇
Electronic strobe with pulse and random effects
◇
High efficiency, low power consumption
◇
Super compact, low weight
◇
Beam angle: 8
°
Voltage:
AC
2
3
0
V, 50
Hz
Light source:
6*12
W 4 in 1 RGBW OSRAM+12*6*5050SMD 3 in 1 RGB LED
Power:
170
VA
Dimension
s
:
W
270 x H
350 x D
200
mm
Net Weight:
6.0
kg
How
to
control
the
unit
You
can
operate
the
unit
in
t
wo
ways.
1.
Master/slave built-in preprogram function
2.
Universal DMX controller
No need to turn the unit off when you change the DMX address, as new
DMX address setting will be effect at once.
Every time you turn the unit on, it will show
MINICUBE-60
on the display
and move
the motors to their position and you may hear some noises for
about 20 seconds,
after that the unit will be ready to receive DMX signal or
run the built in
programs.
Sound sense
Select
Sound sense
, press the
enter
button to confirm, present mode will
blink on the display. Use the
down
and
up
button to change the
sound sense from 0-100. Once the mode has been selected, press the
ENTER
button to setup, to go back to the functions without any change the
MENU button again. Hold and press the MENU button about one second or
w
ait
for one minute to exit the menu mode.
Pan Reverse
With this function you can reverse the Pan-movement.
2
11
