background image

USER MANUAL

 

 

3

 
LASER SAFETY AND OPERATING INSTRUCTIONS   

             

STOP AND READ ALL LASER SAFETY DATA 

 

Laser light is different from any other light source witch you may be familiar. The 

light from this product can potentially cause eyes injury if not set up and used 

properly.  

 

Laser light is thousands of times more concentrated than light from any other kind 

of light source. This concentration of light power can cause instant eye injuries, 

primarily by burning the retina (the light sensitive portion at the back of the eye). 

Even if you can not feel “heat” from a laser beam, it can still potentially injure or 

blind you or your audience. Even very small amounts of laser light are potentially 

hazardous even at long distances. Laser eye injuries can happen quicker than 

you can blink. 

 

It is incorrect to think that because these laser entertainment products split the 

laser into hundreds of beams or laser beam is scanned out in high speed, that an 

individual laser beam is safe for eye exposure. This laser product uses dozens of 

milliwatts of laser power (Class 4 levels internally). Many of the individual beams 

are potentially hazardous to the eyes. 

 

It is also incorrect to assume that because the laser light is moving, it is safe. This 

is not true. Nor, do the laser beams always move. Since eye injuries can occur 

instantly, it is critical to prevent the possibility of any direct eye exposure. In the 

laser safety regulation, it is not legal to aim Class 4 lasers in areas which people 

can get exposed. This is true even if it is aimed below people’s faces, such as on 

a dance floor. 

 

Do not operate laser without first reading and understanding all safety and 

technical data in this manual. 

 

Always set up and install all laser effects so that all laser light is at least 3 

meters (9.8 feet) above the floor on which people can stand. See “Proper 

Laser Set-up & Usage” section later in this manual. 

Содержание LSX-142SRGY StageLine



























Отзывы: