iMettos HLQ-14, Инструкция по эксплуатации

Страница: 10 / 12

9
Chapter 8 Machine Maintenance and Daily Inspection
Note: before the maintenance operation work: please unplug the power before
servicing the machine, make sure the machine away from the power.
8.1 The necessity for regular maintenance
1. Regularly for cutting mixer machine maintenance, can effectively extend the
service life.
2. Periodically for cutting mixer machine cleaning, can ensure food quality and safety.
8.2 Daily inspection of key components
1. Cutting blade
Should check the cutting blade whether installation firm, have any damage, before
starting the machine.
2. Belt
Belt should be regularly adjusted, after 2-3 years belts will be replaced, it is necessary
to contact "service center".
3. Cable
Regularly check the cable, replace if necessary, please contact the service center.
Chapter 9 Recycling Method
9.1 No repair
For some reason the machine cannot be repaired, to ensure the machine can't use again,
cancel all electrical connections.
9.2 Discard
When the machine can't repair it abandoned, please contact the waste disposal company,
will be qualified materials used in the manufacture of a variety of other components.
9.3 Electrical and electronic waste
According to the standard of 2002/95 / EC, 2002/96 / EC and 2002/108 / EC, limit the use of
certain hazardous substances in electrical and electronic equipment.
The logo on the products or packaging, means that the product cannot be discarded as
household waste.