EN
11
•
DO NOT place the appliance in water or other liquids.
•
NEVER direct the flexible hose, pipe or any other accessory
towards eyes or ears and do not put them in your mouth when they
are connected to the vacuum cleaner.
• Always use the appliance with a motor protection filter to prevent
damaging the motor and the vacuum cleaner.
• The power cable must always be fully unwound to prevent hazardous
overheating.
SYMBOLS
Warning
ON/OFF switch
Prohibited
Protection class II
DESCRIPTION OF THE APPLIANCE AND ATTACHMENTS (fig. A)
Refer to figure [A] in the illustrative guide to verify your appliance equipment. All the figures
are on the cover pages of these instructions for use
1.
Handle
2.
Manual cable winding system
2A Turning upper cable hook
2B Fixed lower cable hook
3.
Fastening screw
4.
Power cable with plug
5.
Accessories
5A Crevice tool
5B Upholstery tool
6.
Multisurface brush
7.
Suction inlet
8.
Dust collection system
8A Dust compartment
8B Filter grille
8C Filter
8D MAX level
9.
Dust compartment lever
10.
Electronic power control
11.
ON/OFF switch
12.
Technical Data
ASSEMBLY
• Loosen the fastening screws (3) of the handle (1) and remove it.
• Attach the handle (1) to the body of the appliance, taking care to assemble it correctly.
• Insert the fastening screw (3) and tighten it clockwise [Fig. B1].
• Select the multisurface brush (6) or the attachment (5) suited to the surface to be
cleaned and connect the suction inlet (7)