22
EN
Only a little steam
or none at all is
dispensed.
There is not enough water in
the reservoir (3).
Fill the reservoir (3).
The anti-scale filter (14) is no
longer effective.
When the anti-scale filter (14) is no longer
effective, the electronic system modifies
steam emission to safeguard the lifespan
of the product.
Check the filter change indicator light
(8) and the acoustic signal are ON, then
replace the filter as explained in the
specific paragraph.
The anti-scale filter (14) is not
inserted correctly.
Cross-check the anti-scale filter insertion
process as indicated in the specific
paragraph.
The impurities that
come out
from the steam holes
stain the garments.
Chemical additives, scented
liquids or descaling agents are
being used.
These substances damage the product:
do not add additives to the water in the
reservoir.
Starch is being used.
Always spray the starch on the reverse
side of the fabric.
Impurities or pieces of
limescale emerge from
the plate.
Possible limescale residue
inside the iron.
Use a damp cloth to remove the impurities
that have deposited on the plate.
Water leaks from the
plate.
Plate temperature (16) too
low due to pressing the
steam request button (17) too
frequently.
Allow slightly longer intervals between the
jets of steam.
The temperature adjustment
knob (13) is set to a
temperature that is too low.
Turn the temperature adjustment knob
(13) into a position from 2 dots upwards.
The steam adjustment knob
(10) is not positioned on the
setting matching the one
selected with the temperature
adjustment knob (13).
Turn the steam control knob (10) to the
setting matching the one selected with the
temperature adjustment knob (13).
The 4 temperature
setting lights flash
simultaneously, and the
iron doesn't work.
Type 1 flaw in the electronic
temperature reading system.
Switch off and then back on again. If
the problem persists, contact Customer
Support.
All 8 lights flash
simultaneously, and the
iron doesn't work.
Type 2 flaw in the electronic
temperature reading system.
Switch off and then back on again. If
the problem persists, contact Customer
Support.
