Imetec N4001, Руководство по эксплуатации

Страница: 17 / 82

15
en
• The battery status LED (12) flashes during recharge.
• The battery status LED (12) turns steady green when the battery is fully charged.
• The battery status LED (12) remains steady green while using the sweeper.
• The battery status LED (12) flashes red for a few seconds when the battery begins to
discharge.
• The battery status LED (12) turns steady red when the battery is completely flat.
noTe: When the appliance is completely charged the control circuit for the
battery interrupts automatically, protecting it from any damage.
noTe:it is completely normal for the feeder to heat up while charging.
• Charge the appliance after each use to ensure it is always in good working order.
• Disconnect the feeder (4) during long periods of inactivity to avoid dispersing any
energy.
noTe: charge the batteries at least every 3/4 months during long periods of
inactivity.
USE
Warning! Do noT use this appliance if there are visible
signs of damage.
• Detach the feeder (4) from the recharging contact (3) [Fig. D1].
• Press the ON/OFF button (11) once to switch the vacuum cleaner on or off [Fig. E1].
• Actuate the power regulator (10) to adjust the power from MIN – MED – TURBO [Fig. E2].
• Using the various power levels implies different cleaning autonomy. Autonomy is about
13 MIN in the TURBO position and about 25 minutes in the MED position. Use the
TURBO power only for persistent dirt and brief periods.
version Min Position Med Position TURbO Position
22.2 volt About 38 min About 24 min About 13 min
18.5 volt About 36 min About 22 min About 12 min
Warning! Do noT use this applaince to vacuum:
• burning ashes, cigarette butts, etc.;
• liquids, such as carpet cleaners;
• sharp or hard objects, such as nails or large glass shards;
• fine powder, such as cement;
• toner powder (for laser printers, copy machines, etc.).