Imetec N2104, Руководство по эксплуатации

Страница: 16 / 156

14
EN
Air flow key (3A) Temperature key (3B)
0 = OFF 1 = low temperature
1 = medium air flow 2 = medium temperature
2 = strong air flow 3 = high temperature
Cold air shot button (3C)
If the appliance has this button, use it to set the straightened
hair.
• If this button is pressed while the appliance is on, the hot air
cools down and the set style lasts longer.
• Once the button is released, the appliance returns to a hot
air flow at the selected level.
CLEANING AND MAINTENANCE
WARNING! Always disconnect the
appliance from the mains supply
before cleaning or performing
maintenance.
Cleaning the appliance and accessories
Clean the appliance and the accessories (diffuser, nozzle)
with a damp cloth when needed. DO NOT use solvents or
other aggressive or abrasive detergents. Otherwise, the
surface could be damaged.
Check the intake opening of the appliance regularly and
remove all hair and dust.
Cleaning the intake filter (5)
If the appliance is provided with an intake filter, clean it as
follows:
• Open the filter cap (5B) as shown in the figure.
• Wipe the front and rear of the filter (5A) and the filter cap (5B)
with a damp cloth.
• Let the parts dry well and put them back on in inverse order.
Note: the more dust is present in the place where the hair
dryer is used, the more often the filter must be cleaned.
WARNING! Make sure all cleaned parts
are completely dry before reusing the
appliance!
STORAGE
When the hair dryer is not used, unplug the appliance from the
socket and store it in a dry and dust-free place.